SIX ROLL REVERSING ROLLING MILL
Read:
Retrun
Retrun
1.Equipment Main Function
This product is used for reversely rolling the high precision and good quality normal carbon steel, stainless steel strips and low alloy steel.
2.Equipment Component
Uncolier, hydraulic coil car and unloading car, 5 roll pinch flattener, entrance and exit platform, rolling mill, left and right recoiler, joint gear box, hydraulic AGC and bending roll system, driving motor, electric control system, equipment lubrication and process lubrication system.
This product is used for reversely rolling the high precision and good quality normal carbon steel, stainless steel strips and low alloy steel.
2.Equipment Component
Uncolier, hydraulic coil car and unloading car, 5 roll pinch flattener, entrance and exit platform, rolling mill, left and right recoiler, joint gear box, hydraulic AGC and bending roll system, driving motor, electric control system, equipment lubrication and process lubrication system.
Six high reversing mill
| Model Technical parameters |
The type 950 | The type 1150 | The type 1380 |
| Material | Common carbon steel and low alloy steel | Common carbon steel and low alloy steel | Common carbon steel and low alloy steel |
| The thickness of the material (mm) | 2.0~3.5 | 2.0~3.5 | 2.0~3.5 |
| The raw material width (mm) | 600~850 | 900~1050 | 1000~1250 |
| Thickness of the finished product（mm） | 0.18~0.6 | 0.18~0.6 | 0.20~0.6 |
| Pressing force(KN) | 9000 | 12000 | 15000 |
| Supporting roll specification（mm） | Φ850×920 | Φ1050×1120 | Φ1250×1350 |
| Intermediate roll specification（mm） | Φ350/Φ320×900 | Φ380/Φ350×1150 | Φ420/Φ380×1380 |
| Work roll specification（mm） | Φ260/Φ235×950 | Φ310/Φ280×1150 | Φ370/Φ340×1380 |
| Driving Method | Work roll drive | Work roll drive | Work roll drive |
| Main motor | DC 1500KW×2 | DC 1000KW×4 | DC 1250KW×4 |
| Reducer | Joint gear box | Joint gear box | Joint gear box |
| Uncoiler (select specification) reducer | Φ508/Φ610×950 | Φ610×1150 | Φ610×1380 |
| Recoiler (optional) | Φ508×950 | Φ508×1150 | Φ610×1380 |
| Rolling speed (m/min) | 800 | 900 | 1000 |
| Uncoiler tension(KN) | 45 | 70 | 70 |
| Recoiler tension(KN) | 10~100 | 14~140 | 17~170 |
| Pressing Method | Hydraulic AGC | Hydraulic AGC | Hydraulic AGC |
| Dc speed control | Siemens | Siemens | Siemens |
| Electric control | Siemens PLC | Siemens PLC | Siemens PLC |
Note: The models and parameters of this form are for reference only, which can be designed and produced according to users' requirements.