(1-6) X 1600MM SLITTING LINE
Read:
Retrun
Retrun
Equipment Brief Introduction:
This HR slitting line is consists of uncoiler, feeder, pinch, pre-leveler, cropping shear, slitter, scrap winder and recoiler, etc. It is used for slitting the wide raw coil into narrow strips in order to prepare material for subsequent processes as milling, pipe welding, cold forming, punch forming, etc. Moreover, this line can also slit various non ferrous metal coils by changing slitting tools of different materials.
Main technical parameters:
This HR slitting line is consists of uncoiler, feeder, pinch, pre-leveler, cropping shear, slitter, scrap winder and recoiler, etc. It is used for slitting the wide raw coil into narrow strips in order to prepare material for subsequent processes as milling, pipe welding, cold forming, punch forming, etc. Moreover, this line can also slit various non ferrous metal coils by changing slitting tools of different materials.
Main technical parameters:
| Thickness of coil plate | 1-6mm |
| Material of coil plate | Carbon Steel σb≤460MPa σs≤235MPa |
| Width of coil plate | 800-2000mm |
| Weight of coil plate | 30T |
| Slitting precision | width tolerance: 0.1mm |
| Slitting speed | 0-50m/min |
| Slitter shaft diameter | φ260mm |
| Recoiling diameter | φ760mm |
| Slitting strips | thickness1-3mm, 13strips; 3mm according to thickness |